PTU Tutorial - 2014 Hot Hat by Ismael Rac!

**This tutorial was written by me and any resemblance is purely coincidental. It is written for those with a working knowledge of Photoshop.**

Scrap Kit

2014 Hot Hat by Creation by Sanie

Template

Template 578 by Millie

Tube

 2014 Hot Hat by Ismael Rac

*You must obtain a license to use this tube.*

Elements

11

14

18

20

21

24

26

27

30

Papers

2

3

12

Let's start!

Open a new canvas, size 650x650.
Open the template and move it onto the canvas. Remove the cr layer.
Add a bevel and drop shadow to each layer.
Place paper 2 over layers 1 and 2. Create a clipping mask to both.
Add paper 3 over layer 3 and create a clipping mask.
Place paper 12 over layer 4. Create a clipping mask.
Place 20 over layer 5.
Add a gradient to layer 5 using #f6d97f and #ca6615.
Merge the two layers together and add a drop shadow.
Repeat the same steps for layers 6-8:
Change the color to #fbd590 and add a stroke (with the bevel and drop shadow already added), size 2, in color #eca54b.
Over layers 6 & 8 place a close up of the tube and create a clipping mask. Change the tube to luminosity.
Place the tube in front of the template in the middle. Resize and add a drop shadow.
Place 26 underneath everything. Duplicate until it's solid and sticking out on the sides.
Behind layer 6 place 30. Resize and add a drop shadow.
Behind 30 place 14. Resize and add a drop shadow.
Behind layer 8 place a copy of 30.
Behind layer 7 place 14 and flip horizontally. Resize and add a drop shadow.
In front of 6 and behind the tube place a couple copies of 24. Resize and add a drop shadow.
Duplicate the grass and move them to the right side in front of 8 and behind the tube.
between the grass and the tube's foot on the right place 27. Flip it vertically and resize. Add a drop shadow.
In front of the shell place 11 and rotate to the right a little. Resize and add a drop shadow.
Duplicate the shell and place it behind the tube and in front of the grass on the left. Rotate to the left a little.
In front of the shell on the left place 21. Resize and add a drop shadow.
On top of the tube place 18. Resize and erase anything hanging off the tube.

Add your tagger mark and copyright information.

Crop off any extra canvas.

Save as a .psd & .png.

Free snags!

Thank you for coming by!

CT Tags - Yellow Bikini by Jose Cano!

Newly released Yellow Bikini by Jose Cano and the matching kit by Creation by Sanie!

Purchase Yellow Bikini here. Free Snags!

Thanks for coming by!

PTU Tutorial - Hawaiian Rock by Arthur Crowe!

**Coming Soon!**

**This tutorial was written by me and any resemblance is purely coincidental. It is written for those with a working knowledge of Photoshop.**

Scrap Kit

Hawaiian Rock by Creation by Sanie

Template

Template 512 by Millie

Tube

 Hawaiian Rock by Arthur Crowe

*You must obtain a license to use this tube.*

Elements

6

9

12

13

14

15

18

19

20

28

Papers

1

3

6

8

11

Let's start!

Open a new canvas, size 650x650.
Open the template and select all the layers except the word art and credits.
Move on to the canvas and resize as necessary.
Add a bevel and drop shadow to each layer of the template.
Starting with layer 1 and place paper 11 over it. Create a clipping mask and resize the paper as you like.
With layer 2,  place paper 3 over it. Create a clipping mask and resize the paper as you like.
On layer 3,  place paper 1 over it. Create a clipping mask and resize the paper as you like.
Place paper 6 over layer 4 and create a clipping mask.  Resize the paper as you like.
Place paper 8 over layer 5 and create a clipping mask. Resize the paper as you like.
Select the pixels of layer 6 and fill with #d32f4a.
Place a close up of the tube in the box and create a clipping mask and change to screen.
On top of the template and to the right of the close up, place the tube. Resize and add a drop shadow.
In front of the tube place 14. Resize and add a drop shadow.
On the right side of the tube behind the word art, place 9. Resize and add a drop shadow.
Behind the drum, place 13. Resize and add a drop shadow.
Duplicate the drum and move it behind layer 6.
Behind the word art on the left side of the tube place 18. Resize and add a drop shadow.
Behind the beach ball to the right place 12. Resize and add a drop shadow.
In front of the word art on the left place 20. Resize and add a drop shadow.
In front of the word art on the right place 28. Resize and add a drop shadow.
On the left side behind the drum place 6. Resize and add a drop shadow.
On top of layer 5 place 15. Resize and add a drop shadow.
Behind the template on the right place 19. Resize and add a drop shadow.
Duplicate the palm trees and rotate so you fill the space up. Resize and add a drop shadow.

Add your tagger mark and copyright information.

Crop off any extra canvas.

Save as a .psd & .png.

Free snags!

Thank you for coming by!

PTU Tutorial - Inked Goddess from José Cano!

**Coming Soon!**

PTU tutorial with Inked Goddess by José Cano using the matching kit made by Creation by Sanie!

Purchase both here soon!

**This tutorial was written by me and any resemblance is purely coincidental. It is written for those with a working knowledge of Photoshop.**

Scrap Kit

Inked Goddess by Creation by Sanie

Tube

 Inked Goddess by José Cano

*You must obtain a license to use this tube.*

Elements

1

2

3

4

7

12

13

14

15

16

18

19

22

28

Papers

9

10

11

Let's start!

Open a new canvas, size 700x650.
Place ele13 on the canvas. Rotate down to the right a little. Duplicate the frame and place it behind the first. Rotate the opposite way. Resize and add a drop shadow to both.
Place the tube in front of the frames. Resize and add a drop shadow.
Place paper10 behind both frames. This paper will fill the back frame and any part of the paper sticking out should be erased.
Place paper9 between the frames. This paper will fill the front frame. Erase anything outside the frame.
Place the close up of the tube over paper9. Resize and drop the fill to 29%.
In front of the tube down by her feet, place eles4 and 22. Resize and add a drop shadow.
Along the frames vertically on the right place ele12. Resize and add a drop shadow.
Behind and above ele12, place ele3. Resize and add a drop shadow.
Duplicate eles 12 and 3 and place them on the left side of the frames.
Behind the frames on the left place ele1 and flip horizontally. Resize and add a drop shadow.
Place ele7 on top of the frames in the upper right hand corner. Resize and add a drop shadow.
On top of the flowers on both sides of the frames, place ele28. Resize and erase anything sticking off the flowers.
In front of the tube's arm on the left, place ele18. Resize and add a drop shadow.
Behind the tube's legs near the flowers, place ele14. Resize and add a drop shadow.
Next to the lipstick place ele15. Resize and add a drop shadow.
Next to ele15, place ele16. Resize and add a drop shadow.
Next to the mascara, place ele19. Resize and add a drop shadow.
Place ele2 on top of the flowers on the left. Resize and add a drop shadow.

Add your tagger mark and copyright information.

Crop off any extra canvas.

Save as a .psd & .png.

Free snags!

Thank you for coming by!

PTU Tutorial - 2014 Cartoony Girl by Ismael Rac!

*Coming Soon!*

PTU tutorial using 2014 Cartoony Girl by Ismael Rac with the matching kit by Creation by Sanie.

**This tutorial was written by me and any resemblance is purely coincidental. It is written for those with a working knowledge of Photoshop.**

Scrap Kit

2014 Cartoony Girl by Creation by Sanie

Tube

 2014 Cartoony Girl by Ismael Rac

*You must obtain a license to use this tube.*

Elements

2

8

14

16

19

22

23

Papers

7

12

Let's start!

Open a new canvas, size 650x700.
Place ele2 on the canvas. Resize and add a drop shadow.
Place the tube in front of the frame. Resize and add a drop shadow.
Place paper12 behind the frame. Resize and erase anything outside the frame.
Place ele8 on the frame to the left of the tube. Resize and add a drop shadow.
Duplicate ele8 and flip it horizontally. Move it to the right of the tube, still on the frame.
Duplicate ele8 and make it smaller than the first and move it below the first one.
Duplicate it one more time and move it the left of the tube to feel the empty space.
Place ele22 on top of the frame on the upper left side behind the tube. Resize and add a drop shadow.
Behind the tube on the left, place ele23 and flip it horizontally. Resize and add a drop shadow.
Behind the tube on the right, place ele19. Resize and add a drop shadow.
Place ele14 in front of ele19. Behind the tube on the left, place ele23 and flip it horizontally. Resize and add a drop shadow.
Place ele16 on top of the tube. Duplicate the sparkles to cover just the tube's dress. Erase anything off the tube or covering her face.

Add your tagger mark and copyright information.

Crop off any extra canvas.

Save as a .psd & .png.

Free snags!

Thank you for coming by!

PTU Tutorial - Nancy by Tony T!

*Coming Soon!*

PTU tutorial using Nancy by Tony Tzanoukakis and the matching kit by Creation by Sanie!

Purchase both here!

**This tutorial was written by me and any resemblance is purely coincidental. It is written for those with a working knowledge of Photoshop.**

Supplies

Font

Dragon is Coming

Mask

RebelDezignsMask-april7

Scrap Kit

Nancy by Creation by Sanie

Tube

 Nancy by Tony Tzanoukakis

*You must obtain a license to use this tube.*

Elements

6

9

10

12

13

14

17

19

21

26

28

29

Papers

3

8

Let's start!

Open a new canvas, size 650x650
Place ele9 on the canvas. Resize and add a drop shadow.
Place the tube in front of the frame and to the right of it. Resize and add a drop shadow.
Place paper 8 behind the frame. Resize and erase anything outside the frame.
Place two close ups on the paper. Resize, create a clipping mask to the paper, and change both to screen.
Behind the tube on the right, place ele6. Flip horizontally, resize, and add a drop shadow.
On top of ele6, place ele14. Resize and add a drop shadow.
Behind the tube on the right, place ele29 toward the bottom. Just have a little hanging out. Resize and add a drop shadow.
Behind the frame along the top, place10 so it follow the curves of the frame.
Behind the tubes legs, place ele28. Resize and add a drop shadow.
In front of the tube and the phone, place ele13. Resize and add a drop shadow.
Behind the bow and to the left, place ele12. Resize and add a drop shadow.
Behind the heel, place ele17. Resize and add a drop shadow.
Place ele26 behind the heel and phone. Rotate so it lays along the direction of the frame a little. Resize and add a drop shadow.
Duplicate the flowers and flip horizontally. Move behind the first copy and move to the right.
Behind the flowers, place ele19. Resize and rotate so the fan points down. Resize and add a drop shadow.
Place ele21 over the elements on the lower half and resize.
Duplicate the sparkles and flip vertically. Use this copy to cover a little of the tube on the right.

Add your tagger mark and copyright information.

Crop off any extra canvas.

Save as a .psd & .png.

Free snags!

Thank you for coming by!

PTU Tutorial - Candy from José Cano!

PTU tutorial with Candy by José Cano using the matching kit made by Creation by Sanie!

You can purchase them both here!

**This tutorial was written by me and any resemblance is purely coincidental. It is written for those with a working knowledge of Photoshop.**

Supplies

Mask

WSL_Mask248

Scrap Kit

Candy by Creation by Sanie

Template

Template 512 by Millie

Tube

 Candy by José Cano

*You must obtain a license to use this tube.*

Elements

1

3

6

8

12

15

16

17

20

21

23

26

27

30

Papers

7

8

9

10

11

Let's start!

Open a new canvas, size 650x650.
Open the template and remove layer 8, 9, & cr.
Move the rest of the template on the canvas. Resize as necessary.
With each template layer (except 7) select the pixels, expand by 4, add a blank layer below it and fill with #fbf2e4, add noise, and a drop shadow.
Place paper 7 over layer 1 and flip 90 degrees CW and create a clipping mask.
Place paper 9 over layer 2 and create a clipping mask.
Place paper 11 over layer 3 and create a clipping mask.
Place paper 10 over layer 4 and create a clipping mask.
Place paper 8 over layer 5 and create a clipping mask.

Select the pixels of layer 6 and fill with #fbf1e5.

Duplicate layer 6 and select the pixels, fill with #fdadc8. Change to Screen.

Between the two squares, place a close up of the tube's face  and create a clipping mask to the bottom square.

Change the color of layer 7 to #f383b5.

Place the tube in front of the template and to the right of the close up. Resize and add a drop shadow.

Place ele21 behind the tube and behind layer 4. Flip horizontally, resize and add a drop shadow.

Place ele12 behind the tube and to the right, flip horizontally. Resize and add a drop shadow.

In front of ele12, place ele23 to the right. Resize and add a drop shadow.

To the left of the cupcake, place ele20. Resize and add a drop shadow.

Along the front of the tube and the bottom of the template, place ele8 and flip 90 degrees CW. Resize and add a drop shadow.

In front of the stick, place ele6 & ele3. Resize and add a drop shadow.

On top of ele6 and behind ele3, place ele17. Resize and add a drop shadow.

To the left of the tube and behind the stick, place ele26. Resize and add a drop shadow.

In front of the stick on the left, place ele1. Resize and add a drop shadow.

Duplicate ele23 from earlier and move it behind ele1 and resize.

Behind the cupcakes, place ele27 and rotate to the right. Resize and add a drop shadow.

Behind the cupcakes and lollipop, place ele30. Resize and add a drop shadow.

In front of the cupcakes, place ele 6, 3, & 15. Resize and add a drop shadow.

On top of everything, place ele16 on the lower half of the tag. Make sure nothing sticks off the canvas or tag.

Add your tagger mark and copyright information.

Crop off any extra canvas.

Save as a .psd & .png.

Free snags!

Thank you for coming by!

PTU Tutorial - Machine Life by Arthur Crowe!

*Coming Soon!*

PTU tutorial using Machine Life by Arthur Crowe and the matching kit made by Creation by Sanie!

Purchase them both here!

**This tutorial was written by me and any resemblance is purely coincidental. It is written for those with a working knowledge of Photoshop.**

Supplies

Font

Fontleroy Brown

Mask

WSL_Mask84

Scrap Kit

Machine Life by Creation by Sanie

Template

Template 89

Tube

 Machine Life by Arthur Crowe

*You must obtain a license to use this tube.*

Elements

4

10

11

13

24

27

Papers

1

4

5

7

12

Let's start!

Open a new canvas, size 650x650.
Open the template and remove Raster 1 and layers 5 & 6.
Move the rest on to the canvas and resize as necessary.
Add a bevel and a drop shadow to 1, 2, 4, & 8.
Place paper 12 over layer 1 and create a clipping mask.
Duplicate the paper and move it above layer 2 and create a clipping mask.
Place paper 4 over layer 3 and create a clipping mask.
Place ele 4 over the circle and resize so it fits the circle. Add a drop shadow.
Place paper 7 over layer 4 and create a clipping mask.
Place paper 5 over layer 7 and create a clipping mask.
Place paper 4 over layer 8 and create a clipping mask.
Place the tube in the middle of layer 7 over layer 4. Resize and add a drop shadow.
Take a close up of the tube and place one in each square of layer 7. Have them facing the tube and change them to Luminosity.
Take ele10 behind layer 3 in the top right hand corner. Resize and add a drop shadow.
Duplicate ele 10 and and make it smaller and place it on top of the first.
Place ele27 on the left side behind layer 3 on the upper left hand corner.
Place ele24 in the lower left hand corner behind layer 4.
Place ele 13 behind everything at the bottom of the template. Resize and add a drop shadow.
Place ele11 on top of the tube and along the lower front of the template. Resize and add a drop shadow.
Use paper1 for the mask.

Add your tagger mark and copyright information.

Crop off any extra canvas.

Save as a .psd & .png.

Free snags!

Thank you for coming by!

PTU Tutorial - Sexy & Shine by Arthur Crowe!

*Coming Soon!*

PTU tutorial using Sexy & Shine by Arthur Crowe and the matching kit made by Creation by Sanie!

Purchase them both here!

**This tutorial was written by me and any resemblance is purely coincidental. It is written for those with a working knowledge of Photoshop.**

Supplies

Font

Copperplate

Scrap Kit

Sexy & Shine by Creation by Sanie

Template

Template 447

Tube

 Sexy & Shine by Arthur Crowe

*You must obtain a license to use this tube.*

Elements

12

14

17

28

Papers

1

5

8

Let's start!

Open a new canvas, size 700x650.
Open the template and move on to the canvas and resize as needed.
Erase the raster layer as well and 5 & 6.
Place the tube in between layers 9 & 10. Resize and add a drop shadow.
Take a close up of the tube and place it over layer 9 and create a clipping mask. Duplicate the close up and flip horizontally. Move to layer 9.
Take paper 8 and place it over layer 9 and the tube. Create a clipping mask, resize, and change to screen. Repeat the same steps for layer 10. Add a drop shadow to both layers 9 & 10.
Add a gold color overlay to both layers 11 & 12.
Place paper 1 over layer 1 and create a clipping mask. Add a bevel and a drop shadow to layer 1.
In front of layer 1, place ele12. Place it on the left side of the tube then duplicate it. Move the duplicate to the right side of the tube. Erase the cut off edges of both fire copies with a soft brush.
Select the pixels of layer 2 and fill with #7e652f. Add a bevel and a drop shadow.
Add a color overlay with layer 3 using #cbb584.
Change the color of layer 4 to #cdb786. Add a drop shadow and a bevel.
Place paper 5 over layer 7 and create a clipping mask. Add a drop shadow.
Take paper 1 again and place it over layer 8 and create a clipping mask. Add a bevel and a drop shadow.
Between layers 4 & 7, place ele28 on the left side of the tube. Duplicate the cityscape and place on the right side of the tube. Make sure they don't stick off the template too much. Add a drop shadow to both.
Place ele14 along the front of the template and in front of the tube. Make sure it covers the full length. Erase anything that overlaps too much.
Move eles 13 & 14 down to the corners on the left and right. Add a gold color to the stars and add a drop shadow.

Add your tagger mark and copyright information.

Crop off any extra canvas.

Save as a .psd & .png.

Free snags!

Thank you for coming by!

PTU Tutorial - Rock Yeh by Tony Tzanoukakis!

PTU tutorial using Rock Yeh by Tony Tzanoukakis!

Matching kit made by Creation by Sanie!

You can purchase them both here!

**This tutorial was written by me and any resemblance is purely coincidental. It is written for those with a working knowledge of Photoshop.**

Supplies

Font

Mixtape Mike

Mask

KLD_Mask08

Scrap Kit

Rock Yeh by Creation by Sanie

Template

Template 341

Tube

 Rock Yeh by Tony Tzanoukakis

*You must obtain a license to use this tube.*

Elements

fuzzy dice

guitar

headphones

light

microphone

musicnotes

musicplayer

speaker

speakers

splat

Papers

1

3

5

6

9

10

Let's start!

Open a new canvas, size 650x650.
Open the template and move it on to the canvas. Resize if necessary.
Remove layer 8 & the cr layer.
Place p06 over layer 1 and create a clipping mask. Add a drop shadow to the layer.
Place p05 over layer 2 and create a clipping mask. Add a drop shadow to the layer.
Place p09 over layer 3 and create a clipping mask. Add a drop shadow to the layer.
Place p10 over layers 4 & 5 and create a clipping mask. Add a drop shadow to the layers.
Place p01 over layers 6 & 7 and create a clipping mask. Add a drop shadow to the layers.
Select the pixels of layer 9 and fill with #f7d1c3.
While the pixels are still selected, add a new layer below the word art and fill with #71182c.
Add noise and a drop shadow.
Place the tube in front of the template. Resize and add a drop shadow.
Take a copy of the tube and place a close up over layers 6 & 7. Create a clipping mask for both and change to Luminosity.
Place two more close ups of the tube over layer 3. Create a clipping mask, change to Luminosity, and drop the opacity to 34%.
Place the speaker on the left and right sides of the template behind the tube.Resize and add a drop shadow.
Take the speakers and place behind the tube and between the individual speakers. Resize and add a drop shadow.
In front of the speaker on the left, place the microphone. Resize and add a drop shadow.
Set the headphones over the speaker on the right. Resize and add a drop shadow.
Behind the set of speakers, place the musicnotes. Resize and add a drop shadow.
Behind the speaker on the right, place the guitar. Resize and add a drop shadow.
Behind the tube on the left, toward the top, place the music player. Resize and add a drop shadow.
Hang the fuzzy dice on the top right hand corner. Resize and add a drop shadow.
Place the light in the upper left hand corner so it shines down on the tag.
Place a copy of the splat behind the template on the right. Duplicate and place it on the left side.

 Name

Main color is #b8225b. 

Select the pixels of the name and expand by 3.

Add a layer below the name and fill with black then add noise and a drop shadow.

Add a bevel and change the gloss contour to Rolling Slope-Descending.

Mask

Open a new canvas, size 600x600.

Open paper 3 and resize to 600x600. Place on top of the canvas.

Open the mask and move on top of the paper.

Remove the white background and place the mask behind the tag. 

Make it evenly stretched on all sides.

Add your tagger mark and copyright information.

Crop off any extra canvas.

Save as a .psd & .png.

Here are free snags!