Get the re-style of the sexy 2013 Nurse tube just in time for St. Patrick’s Day tags for free with any purchase! Just pop them in your cart at check out. GC not accepted as a form of payment.
Free Snags!
Thanks for stopping by!
Friday, February 28, 2014
Thursday, February 27, 2014
PTU Tutorial - Fire Babe Fighter by Arthur Crowe!
*Coming Soon!*
PTU tutorial using Fire Babe Fighter by Arthur Crowe with the matching kit by Kizzed by Kelz!
Purchase them both here!
**This tutorial was written by me and any resemblance is purely coincidental. It is written for those with a working knowledge of Photoshop.**
Supplies
Font
Scrap Kit
Tube
*You must obtain a license to use this tube.*
Elements
2
5
11
16
19
20
22
24
26
27
30
34
Papers
1
Let's start!
Open a new canvas, size 650x650.
Place ele22 on the canvas. Resize and add a drop shadow.
Place the tube in front of the frame on the left. Resize and add a drop shadow.
Place paper 1 behind the frame, resize, and erase anything outside the frame.
Place a closeup of the tube on top of the paper, resize, and mask it to the paper. Change it to screen.
On the right side of the frame, place ele27. Resize and add a drop shadow.
In front of the ladder, place ele5 and resize. Rotate the tire so it looks like it is laying against the ladder.
In front of the tire and to the left, place ele26 and flip it horizontally. Resize and add a drop shadow.
Behind the tube, place ele16. Flip it horizontally and resize it so it meets the left end of the frame and sticks out in front of her a little. Add a drop shadow.
In front of the tube on the left side, place ele30. Resize and add a drop shadow.
To the left of the light and behind it, place ele19. Resize and add a drop shadow.
Behind ele39, place ele2. Have the forked end down and have it it lean toward the tube. Resize and add a drop shadow.
Behind the tube, place ele24 at an angle. Start it from behind the tube and down toward the tire. Resize and add a drop shadow.
In front of everything, place ele20 on the left side. Duplicate and flip it horizontally then move to the right to cover the front. Use a soft eraser brush and soften the bottom of the flames.
Between the flames and the tire, place ele11 and flip horizontally and resize.
On top of the flames add ele34 and resize.
Place ele22 on the canvas. Resize and add a drop shadow.
Place the tube in front of the frame on the left. Resize and add a drop shadow.
Place paper 1 behind the frame, resize, and erase anything outside the frame.
Place a closeup of the tube on top of the paper, resize, and mask it to the paper. Change it to screen.
On the right side of the frame, place ele27. Resize and add a drop shadow.
In front of the ladder, place ele5 and resize. Rotate the tire so it looks like it is laying against the ladder.
In front of the tire and to the left, place ele26 and flip it horizontally. Resize and add a drop shadow.
Behind the tube, place ele16. Flip it horizontally and resize it so it meets the left end of the frame and sticks out in front of her a little. Add a drop shadow.
In front of the tube on the left side, place ele30. Resize and add a drop shadow.
To the left of the light and behind it, place ele19. Resize and add a drop shadow.
Behind ele39, place ele2. Have the forked end down and have it it lean toward the tube. Resize and add a drop shadow.
Behind the tube, place ele24 at an angle. Start it from behind the tube and down toward the tire. Resize and add a drop shadow.
In front of everything, place ele20 on the left side. Duplicate and flip it horizontally then move to the right to cover the front. Use a soft eraser brush and soften the bottom of the flames.
Between the flames and the tire, place ele11 and flip horizontally and resize.
On top of the flames add ele34 and resize.
Add your tagger mark and copyright information.
Crop off any extra canvas.
Save as a .psd & .png.
Free snags!
Thank you for coming by!
**Rac Special Buy - Today 2/27 Only!**
Get the awesome 2013 Fun Attitude tube with the matching kit for free with any purchase! Just pop them in your cart at check out. GC not accepted as a form of payment.
Visit: http://xeracx.net/store/
Free Snags!
Thanks for stopping by!
Wednesday, February 26, 2014
PTU Tutorial - 2014 Hot Legs by Ismael Rac!
*Coming Soon!*
PTU tutorial using 2014 Hot Legs by Ismael Rac with the matching kit by Kizzed By Kelz.
**This tutorial was written by me and any resemblance is purely coincidental. It is written for those with a working knowledge of Photoshop.**
Supplies
Scrap Kit
Template
Tube
*You must obtain a license to use this tube.*
Elements
8
9
13
16
17
18
19
26
27
28
29
30
31
Papers
1
2
9
10
14
Let's start!
Open a new canvas, size 650x700.
Open the template and unclick the cr layer, 9, and 10.
Move the rest on to the canvas. Resize as necessary.
Add a bevel and a drop shadow to each template layer.
Place the tube in the front of the template. Resize and add a drop shadow.
Take a close up of the tube and place it over layer 7 and create a clipping mask. Resize her and move her around.
Place paper 9 behind the tube close up and create a clipping mask. Resize the paper so it's almost the same size as the square.
Repeat the same steps for layer 8, but flip the the tube close up so she's facing away.
Place paper 10 over layer 6. Move around until you see the white dotted lines and create a clipping mask.
Place paper 1 over layer 5 and create a clipping mask. Move the paper around and resize as necessary so you have some flowers visible in the lower left hand corner.
Duplicate paper1 and place it over layer 1 and create a clipping mask. Move the paper around so you have flowers in the upper right hand corner.
Place paper 14 over layer 3 so just the yellow paper shows. Resize and create a clipping mask.
Duplicate paper 14 and move it over layer 4 so just the yellow paper shows. Resize and create a clipping mask.
Place paper 2 over layer 2 and create a clipping mask. Resize and create a clipping mask.
Place ele16 on top of layer 6. Resize and rotate the flowers so the lay at diagonal. Erase any flowers hanging off the template too much.
Place ele19 on top of layer 3 and flip so it's the opposite of the flowers. Delete anything hanging off the template.
Place ele27 on top of layer 3. Resize and move around so you have random small butterflies around the top of the tag.
Behind layer 2, place ele26. Resize so it lays behind the circle.
Place ele8 on the bottom left corner of layer 7. Resize and add a drop shadow.
Duplicate ele8 and place on the bottom right corner of layer 8.
Place ele13 on a big flower from ele16. Resize and add a drop shadow.
Place ele18 behind the tube's foot on the left and resize.
Behind ele18, place a couple of ele9s. Resize and add a drop shadow.
Place ele17 behind the tube's foot and to the left of it a little. Resize and add a drop shadow.
Behind the template on the left, place ele29. Resize and add a drop shadow.
Behind the tag on the left side, place ele30. Resize and add a drop shadow.
Place ele31 behind the tag on the right. Flip horizontally, resize, and add a drop shadow.
On top of the tag and tube, place ele28. Place it the same way you did ele19. Resize and erase anything hanging off the tag.
Open the template and unclick the cr layer, 9, and 10.
Move the rest on to the canvas. Resize as necessary.
Add a bevel and a drop shadow to each template layer.
Place the tube in the front of the template. Resize and add a drop shadow.
Take a close up of the tube and place it over layer 7 and create a clipping mask. Resize her and move her around.
Place paper 9 behind the tube close up and create a clipping mask. Resize the paper so it's almost the same size as the square.
Repeat the same steps for layer 8, but flip the the tube close up so she's facing away.
Place paper 10 over layer 6. Move around until you see the white dotted lines and create a clipping mask.
Place paper 1 over layer 5 and create a clipping mask. Move the paper around and resize as necessary so you have some flowers visible in the lower left hand corner.
Duplicate paper1 and place it over layer 1 and create a clipping mask. Move the paper around so you have flowers in the upper right hand corner.
Place paper 14 over layer 3 so just the yellow paper shows. Resize and create a clipping mask.
Duplicate paper 14 and move it over layer 4 so just the yellow paper shows. Resize and create a clipping mask.
Place paper 2 over layer 2 and create a clipping mask. Resize and create a clipping mask.
Place ele16 on top of layer 6. Resize and rotate the flowers so the lay at diagonal. Erase any flowers hanging off the template too much.
Place ele19 on top of layer 3 and flip so it's the opposite of the flowers. Delete anything hanging off the template.
Place ele27 on top of layer 3. Resize and move around so you have random small butterflies around the top of the tag.
Behind layer 2, place ele26. Resize so it lays behind the circle.
Place ele8 on the bottom left corner of layer 7. Resize and add a drop shadow.
Duplicate ele8 and place on the bottom right corner of layer 8.
Place ele13 on a big flower from ele16. Resize and add a drop shadow.
Place ele18 behind the tube's foot on the left and resize.
Behind ele18, place a couple of ele9s. Resize and add a drop shadow.
Place ele17 behind the tube's foot and to the left of it a little. Resize and add a drop shadow.
Behind the template on the left, place ele29. Resize and add a drop shadow.
Behind the tag on the left side, place ele30. Resize and add a drop shadow.
Place ele31 behind the tag on the right. Flip horizontally, resize, and add a drop shadow.
On top of the tag and tube, place ele28. Place it the same way you did ele19. Resize and erase anything hanging off the tag.
Add your tagger mark and copyright information.
Crop off any extra canvas.
Save as a .psd & .png.
Free snags!
Thank you for coming by!
Tuesday, February 25, 2014
**Rac Special Buy 2/25 - 2/26**
Get both amazing 2013 Want Me tubes with the matching kit for free with any purchase! Just pop them in your cart at check out.
GC not accepted as a form of payment.
It’s close to end of month so catch up on all the amazing tubes from Ismael Rac. Also grab the bonus tube before she's gone and get a very lush SL to boot!
Visit: http://xeracx.net/store/
Free Snags!
Thanks for stopping by!
Monday, February 24, 2014
PTU Tutorial - On The Road Again
PTU tutorial using On The Road Again by Jackie's Jewels!
This kit has everything you need to make that summer road trip tag and escape the winter blues! It has elements from places across America and everything you need for your travels.
You can purchase it at the Pimpin' PSPers Warehouse!
**This tutorial was written by me and any resemblance is purely coincidental. It is written for those with a working knowledge of Photoshop.**
Supplies
Scrap Kit
Tube
*You must obtain a license to use this tube.*
Elements
burger
cactus2
camera
drink
envelope1
envelope2
frame5
gaspump
hotdog
keys
map1
map2
old bike
poker hand
postcard
sign1
sign2
stop sign button
suitcase
Papers
2
4
Let's start!
Open a new canvas, size 650x650.
Place frame 5 on the canvas and rotate to the rip is at the bottom. Resize and add a drop shadow.
Place paper 2 behind the frame and resize. Erase anything outside the frame.
Place the bike in front of the frame on the left. Resize and add a drop shadow.
Place the tub in front of the frame and to the right of the bike and flip horizontally. Resize and add a drop shadow.
Behind the bike on the left, place the cactus. Resize and add a drop shadow.
Behind the cactus, place sign1. Resize and add a drop shadow.
Between the bike and cactus, place the stop sign button. Resize and add a drop shadow.
Between the bike and the tube, place map1 and map2. Resize and add a drop shadow.
In front of the tube, place the drink, hamburger, and hot dog. Resize and add a drop shadow.
On the right side of the frame behind the frame, place the cactus. Resize and add a drop shadow.
In front of the cactus, place the gas pump. Resize and add a drop shadow.
In front of the gas pump and bike, place the suitcase. Resize and add a drop shadow.
On top of the suitcase, place the keys. xResize and add a drop shadow.
In front of the suitcase, place the camera by the tube's foot. Resize and add a drop shadow.
To the left of the camera, place envelope1. Resize and add a drop shadow.
Behind the camera and envelope, place the poker hand. Resize and add a drop shadow.
Behind the poker hand, place sign2. Resize and add a drop shadow.
Behind sign2, place the postcard behind the tube. Resize and add a drop shadow.
Behind the postcard, place envelope2.
Place frame 5 on the canvas and rotate to the rip is at the bottom. Resize and add a drop shadow.
Place paper 2 behind the frame and resize. Erase anything outside the frame.
Place the bike in front of the frame on the left. Resize and add a drop shadow.
Place the tub in front of the frame and to the right of the bike and flip horizontally. Resize and add a drop shadow.
Behind the bike on the left, place the cactus. Resize and add a drop shadow.
Behind the cactus, place sign1. Resize and add a drop shadow.
Between the bike and cactus, place the stop sign button. Resize and add a drop shadow.
Between the bike and the tube, place map1 and map2. Resize and add a drop shadow.
In front of the tube, place the drink, hamburger, and hot dog. Resize and add a drop shadow.
On the right side of the frame behind the frame, place the cactus. Resize and add a drop shadow.
In front of the cactus, place the gas pump. Resize and add a drop shadow.
In front of the gas pump and bike, place the suitcase. Resize and add a drop shadow.
On top of the suitcase, place the keys. xResize and add a drop shadow.
In front of the suitcase, place the camera by the tube's foot. Resize and add a drop shadow.
To the left of the camera, place envelope1. Resize and add a drop shadow.
Behind the camera and envelope, place the poker hand. Resize and add a drop shadow.
Behind the poker hand, place sign2. Resize and add a drop shadow.
Behind sign2, place the postcard behind the tube. Resize and add a drop shadow.
Behind the postcard, place envelope2.
Add your tagger mark and copyright information.
Crop off any blank canvas.
Save as a .psd & .png.
Free snags!
Thank you for coming by!
PTU Tutorial - Blonde Angel by Arthur Crowe!
PTU tutorial using Blonde Angel by Arthur Crowe and the newly revamped matching kit by Kizzed by Kelz!
Purchase them both here!
**This tutorial was written by me and any resemblance is purely coincidental. It is written for those with a working knowledge of Photoshop.**
Supplies
Font
Mask
Scrap Kit
Tube
*You must obtain a license to use this tube.*
Elements
5
8
9
10
14
29
Papers
6
9
Let's start!
Open a new canvas, size 650x650.
Move ele5 on to the canvas. Resize and add a drop shadow.
Place paper 6 behind the frame and resize. Erase anything outside the frame.
Place the full size tube in front of the frame on the right. Resize and add a drop shadow.
Place a closeup on top of the paper to the left of the tube. Clip to the paper and change to Screen.
Place ele8 behind and a little to the right of the tube on top of the frame. Resize and add a drop shadow.
Duplicate ele8, flip horizontally, and move to the left of the tube along the frame.
Behind ele8, place ele9. Resize and add a drop shadow.
Duplicate ele9 and place it behind the second ele8.
Sticking out behind ele9 at the top of the frame, place ele14. Flip horizontally, resize, and rotate a little.
Duplicate ele14, flip horizontally, and move to the other side behind the second ele9.
Place ele29 behind everything on the frame behind the tube's head. Just have a few laying on the frame and erase the rest.
Add a couple more copies of the hearts below the flowers behind the frame.
Add more hearts on the frame on the left behind ele14.
Use ele10 to add flowers along the outside edges of large flowers. Erase anything too far off the tag.
Move ele5 on to the canvas. Resize and add a drop shadow.
Place paper 6 behind the frame and resize. Erase anything outside the frame.
Place the full size tube in front of the frame on the right. Resize and add a drop shadow.
Place a closeup on top of the paper to the left of the tube. Clip to the paper and change to Screen.
Place ele8 behind and a little to the right of the tube on top of the frame. Resize and add a drop shadow.
Duplicate ele8, flip horizontally, and move to the left of the tube along the frame.
Behind ele8, place ele9. Resize and add a drop shadow.
Duplicate ele9 and place it behind the second ele8.
Sticking out behind ele9 at the top of the frame, place ele14. Flip horizontally, resize, and rotate a little.
Duplicate ele14, flip horizontally, and move to the other side behind the second ele9.
Place ele29 behind everything on the frame behind the tube's head. Just have a few laying on the frame and erase the rest.
Add a couple more copies of the hearts below the flowers behind the frame.
Add more hearts on the frame on the left behind ele14.
Use ele10 to add flowers along the outside edges of large flowers. Erase anything too far off the tag.
Add your tagger mark and copyright information.
Crop off any extra canvas.
Save as a .psd & .png.
Free snags!
Thank you for coming by!
Sunday, February 23, 2014
**Rac Special Buy 2/23 - 2/24**
Get the sexy special layers of the Cute Sailor tube for free with any purchase! Just add her to your cart before you check out. GC not accepted as a form of payment; don’t miss out!
Visit: http://xeracx.net/store/
Free Snags!
Thanks for stopping by!
Subscribe to:
Posts (Atom)
